GS Globoidal Cam Indexers

Globoidal cam indexers are typically used for continuously running applications. The cams are designed to match the indexing and idle times without stopping the motor, but can also be used for start-stop applications. These are versatile units suitable for a wide range of applications.

GS 50
Maximum size of rotating plate:* Ø 285 mm
Number of stations: 2, 3, 4, 5, 6, 8, 10, 12, 16
other stations available on request
Precision
Repeatability: ± 27” (± 0.026 mm @ 200 mm radius)
GS 80
Maximum size of rotating plate:* Ø 435 mm
Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16
other stations available on request
Precision
Repeatability: ± 18” (± 0.018 mm @ 200 mm radius)
GS 95
Maximum size of rotating plate:* Ø 550 mm
Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24
other stations available on request
Precision
Repeatability: ± 15” (± 0.015 mm @ 200 mm radius)
GS 110
Maximum size of rotating plate:* Ø 575 mm
Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24
other stations available on request
Precision
Repeatability: ± 15” (± 0.015 mm @ 200 mm radius)
GS 140
Maximum size of rotating plate:* Ø 675 mm
Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24
other stations available on request
Precision
Repeatability: ± 15” (± 0.015 mm @ 200 mm radius)
GS 150
Maximum size of rotating plate:* Ø 885 mm
Number of stations: 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24
other stations available on request
Precision
Repeatability: ± 12” (± 0.012 mm @ 200 mm radius)

  

 *

Max. rotating plate dimension only serves as guideline. The actual effective radius of inertia should be considered while selecting indexer model.


Customisation – available on request

Installation of geared motor, cam switching mechanism, sensor and option to fit an overload coupling

Optional versions – available on request

  • Shaft drive for sizes GS 95, GS 110, GS 140 and GS 150
  • Hollow output shaft with through bore for sizes GS 110: Ø 20 mm, GS 140: Ø 25 mm and GS 150: Ø 36 mm

THE GS AT A GLANCE

  • Through hardened and CNC ground steel cam
  • High accuracy as standard – even greater accuracy available on request
  • Cast iron housing for rigidity and zero vibration
  • Shaft output and flange output are optional on most models
  • Double dwell cam for high speed indexers